Slip ring assembly used to transmit radar intermediate frequency (tens of megahertz) signals and energy. This type of slip ring has a higher frequency and needs shielding. Ordinary slip rings can also be used to transmit signals up to 12 MHZ. One loop is connected to the center conductor, and the outer layer of one loop cable is used as a shielding ring. Coaxial shielded slip rings are usually used to transmit signals above 12 MHZ. The cross section of the slip ring is a groove shape, which is essentially a rectangular coaxial conductor. There is also a capacitive intermediate frequency slip ring in which the central conductor is ring-shaped and supported in the shielding layer by an insulating pad. There is a gap between the rotating part and the fixed part, which are not in contact with each other. When the antenna rotation range is limited, the slip ring can be used instead of cable winding device.
Contact Person: Ms. Yellow
Tel: 86-755 23420945
Fax: 86-755-23420749
380VAC IP65 Explosion Proof Slip Ring For Oil Platform Application
126 Circuit Industrial Slip Ring 400VAC Various Current For Motion Simulator
4 Signal Thermocouple Slip Ring 300mm Size 0 - 200 Rpm Working Speed
High IP Protection Ferris Wheels Industrial Slip Ring Slow Speed No Friction Long Life
Gigabit Ethernet Slip Ring RJ45 Connector Air Channel For Filling Machine
100M Ethernet Electrical Slip Ring Assembly
3 Channel Gigabit Ethernet Slip Ring , Cable Slip Ring 380 VAC Rating Voltage
Anti Explosion Grade Conductive Slip Ring With Gigabit Ethernet Signal
Integrate Current 1 MPa Air Rotary Union Gas Liquid Rotating Joint
10 MPa Air Rotary Union 2 Air Channel 380 VAC For Automatic Equipment
Motion Simulator Air Rotary Union Reliable Transmitting USB 2.0 Signal
10 MPa Air Rotary Union 2 Channel 6 Circuits 5Amp Power Integral Slip Ring