Collaborating robots support people in the immediate vicinity in assembly work, the so-called human robot collaboration . We developed a combination of slip ring and rotary union for robot-guided, automated screw driving processes with plastic screws and monitoring of the torque.
The screw is guided and positioned with a vacuum. A control loop terminates the tightening process when the max. torque is reached. With its steel shaft, this combination can absorb the resulting forces and torques, but at the same time it is also weight optimized, so that it can be used on robots with a lower load capacity.
With a combination of an electrical slip ring for communication (Industrial Ethernet) and pneumatic , suitably designed as an element between robot arm and tool, rotations of more than 360° and several clamping processes can be realized in conjunction with continuous monitoring and communication for a wide range of applications.
This device can accommodate torques corresponding to the size. The pneumatic channels enable flexible use in changing tasks or later upgrading of your production system.
Contact Person: Ms. Yellow
Tel: 86-755 23420945
Fax: 86-755-23420749
380VAC IP65 Explosion Proof Slip Ring For Oil Platform Application
126 Circuit Industrial Slip Ring 400VAC Various Current For Motion Simulator
4 Signal Thermocouple Slip Ring 300mm Size 0 - 200 Rpm Working Speed
High IP Protection Ferris Wheels Industrial Slip Ring Slow Speed No Friction Long Life
Gigabit Ethernet Slip Ring RJ45 Connector Air Channel For Filling Machine
100M Ethernet Electrical Slip Ring Assembly
3 Channel Gigabit Ethernet Slip Ring , Cable Slip Ring 380 VAC Rating Voltage
Anti Explosion Grade Conductive Slip Ring With Gigabit Ethernet Signal
Integrate Current 1 MPa Air Rotary Union Gas Liquid Rotating Joint
10 MPa Air Rotary Union 2 Air Channel 380 VAC For Automatic Equipment
Motion Simulator Air Rotary Union Reliable Transmitting USB 2.0 Signal
10 MPa Air Rotary Union 2 Channel 6 Circuits 5Amp Power Integral Slip Ring