φ70mm Radar Through Hole Slip Ring with Aluminum Alloy Shaft and Housing
Through bore or through slip rings are provided with a center hole to provide clearances for shafts, rotary joints, optics and other axial structures needed for the function of the rotating assembly.The standard hole size has different spec from 12.7mm ~ 100mm.
Slip rings provided with a through bore are custom designed and manufactured to meet the available mechanical envelope within the equipment or proposed new design equipment. Mechanical features may include mounting flanges, shaft collars, bolt circles, ring gears or other features.
Feature
Typical application
Parameter
|
Picture | |
Through bore size | 70mm |
|
Number of circuits | 6,12,18,24 or more | |
Operating speed | 300rpm or higher | |
Current Rating | 5A,10A,15A/circuit | |
Voltage | 380VAC | |
Dielectric strength | ≥1000V@50Hz | |
Insulation Resistance | 1000MΩ@ 500VDC | |
Electrical noise | 100 milliohms max. | |
Operating temperature | -20~+60℃ | |
Protection Grade | IP54 | |
Lead wire size |
5A- 22AWG |
|
Option |
• Lead wire length |
Outline drawing
Q: Do you offer hybrid design with electrical channel and fluid or air channel combination?
Yes,CENO air/fluid rotary union and electrical slip ring can be integrated together into one complete solution.The solution can for fluid, power, signal, and data transfer. We offer both standard assemblies and custom solutions to meet your exact requirements. Welcome to consult us with your demands.
Q: How do we mount the hollow shaft slip ring on our machinery?
Hollow shaft mounting way
1) Position the slip ring in the desired location and equally tighten both set screws to the shaft on each end of the union. Torque to 25 lb-in.
2) Route the wiring and make the necessary connections. Do not allow the wiring to restrict free rotation of the slip ring.
3) Position a screw or dowel (not supplied) in the anti-rotation tab.
Flange mounting way
1) Align the mounting holes in the flange to mounting base and install flat washers and thread forming screws (NOT SUPPLIED) for plastic. Securely tighten screws.
2) Route the wiring and make the necessary connections. Do not allow the wiring to restrict free rotation of the slip ring.
3) Position a screw or dowel (not supplied) in the anti-rotation tab.
CENO Advantage
Member in engineering team have more than 10 years experience in slip ring's field.Operators work on critical procedure are all qualified by internal training.
Why choose CENO
CENO is one technologically company in slip ring field who engages research and development,manufacturing and sales.We have advanced equipment and high precision test instruments to ensure products quality and reliable performance.Facility area covers 3000 square meters and located in China.
Honor
ISO9001,CE,RoHS,UL,Explosion-proof
Service CENO provides
Solution offerring for 360° rotation system.
Mass and customized production.
24 hours,7days consultant service.
Consult us with your requests for any 360° rotation system.We will provide one stop service to you timely respond your inquiries.
Contact Us at Any Time